Gå til indhold
  1. All products
  2. Machine Vision
  3. Industrial camera
  4. CL Line Scan Camera
  5. Hikrobot MV-CL081-41CM
  6. CL Line Scan Camera
Prisliste: --- Out of EU --- Prisliste
Prisliste: --- Out of EU --- Prisliste
OFFICIAL HIKROBOT PARTNERCE · EU compliant

Hikrobot MV-CL081-41CM

CL Line Scan Camera

Order code
MV-CL081-41CM
Order number
306301607
Resolution
8192 × 1
Pixel size
7 μm

Hikrobot MV-CL081-41CM is an industrial machine-vision camera for inspection, measurement and positioning in automated production.

Key features

✓Integrates multiple ISP technologies, and supports manual adjustment of Gamma correction, FFC correction, LUT, black level, etc.
✓Supports multiple exposure and acquisition modes.
✓Adopts configurable bi-directional I/O hardware design.
✓Compact design and flexible installation.
✓Compatible with Camera Link Protocol and GenlCam Standard.

Applications & Industries

What you can solve with this product:

Typical industries: New energyMetal3C electronics
Presence and completeness inspection
Presence and completeness inspection
Measurement and positioning
Measurement and positioning
Surface and print/label inspection
Surface and print/label inspection
Robot guidance and pick-and-place
Robot guidance and pick-and-place

Specifications

Camera
Sensor typeCMOS
Pixel size7 μm
Resolution8192 × 1
Image mode1-line
Max. line rate20 kHz (Base), 40 kHz (Medium), 80 kHz (Full)
Configuration modeBase, Medium, Full
Tap geometry1 × 2, 1 × 4, 1 × 8
Tap number2 Taps, 4 Taps, 8 Taps
Pixel clock40 MHz, 66 MHz, 80 MHz, 85 MHz
Dynamic range64.7 dB
SNR44.3 dB
Supports 1 ×, 2 ×, 4 ×, 8 ×
Exposure time2 μs to 10 ms
Off/ Once/ Continuous exposure mode; supports fixed exposure time, trigger-width exposure
MonoMono
Pixel formatMono 8/10/12
BinningSupports 1 × 1, 2 × 2, 4 × 4
Reverse imageSupports horizontal reverse image output
Trigger modeExternal trigger, internal trigger
External trigger modeLine trigger, frame trigger, line + frame trigger
Electrical features
Camera Link (SDR connector); USB interface for updating firmware
12-pin P10 connector provides power and I/O: configurable input and output × 4 (Line 0/1/3/4), and support single-end/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4).
Power supply12 VDC to 24 VDC
Power consumptionTyp. 5.8 W @ 12 VDC
Mechanical
M72*0.75, flange back length 12 mm, applicable to F-mount via lens adapter
76 mm × 76 mm × 42.1 mm (3.0" × 3.0" × 1.7")
WeightApprox. 320 g (0.7 lb.)
Ingress protectionIP40 (under proper lens installation and wiring)
Working temperature: 0 °C to 55 °C (32 °F to 131 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F)
Humidity5% RH to 90% RH (no condensation)
General
Client softwareMVS and frame grabber software meeting with Camera Link Protocol
Operating system32/64-bit Windows 7/10,64-bit Windows 11
CompatibilityCamera Link V1.2, GenICam
CertificationCE, RoHS, KC
Technical support
We help with selection, integration and operation
Officiel Hikrobot-partner
Genuine, CE-marked products with full warranty
Full range & fast quotes
We source the entire Hikrobot range, including special items

Need advice or a quote?

ZTEC is your Hikrobot partner — we find the right configuration for your application.

Contact us

Talk to an 
Automation Expert


Har du spørgsmål om dette produkt, priser eller dine automatiseringsprojekter? Udfyld formularen, så vil en automatiseringsekspert fra vores team kontakte dig inden for 24 timer.


Ring til vores tekniske salgsteam.

Sales & Technical
+45 3233 0070
info@ztec.dk




Udfyld formularen

Indsend

Thank you!

Our team will message you back as soon as possible.

In the meantime we invite you to visit our website.