Standardiserede Svejseløsninger
EASY ARC
Entry Solution for welding automation
CUBE Solutions
Industrial solution for full scalable welding automation
EASY ARC SVEJSELØSNING
Den modulære løsning til værkstedsgulvet
EASY ARC
Easy Arc er perfekt for den mellemstore virksomhed, der har brug for en svejseekspert. Automatiser din småserieproduktion for at holde trit med efterspørgslen eller gentagne opgaver, som dine dygtige svejsere ellers spilder tid på at håndtere. Easy Arc viser sig som en innovativ løsning på nutidens udfordringer - fra værkstedsdrift til industrivirksomheder.
Vælg dit EASY ARC setup
EASY ARC har to standard versioner. En med MIG/MAG og en med TIG. Du kan vælge forskelligt tilvalgsudstyr for at skabe den perfekte applikation til din svejsning.
Populære tilvalg: Svejseudstyr, udsugning, positioner, sensorik, JoyPen og Offline Programming.
Alt efter din type af opgave, hvor ofte du skal ændre svejsemønstre, og samarbejde med øvrigt udtstyr, kan disse tilvalg hjælpe din applikation helt i mål. Vi skal nok hjælpe dig finde, hvad du har behov for.
Hvem får gavn af EASY ARC?
EASY ARC-robotcellen er løsningen til serieproduktion, der kræver fleksibel konfiguration. I stedet for manuelt at svejse de samme dele igen og igen, kan du hurtigt lære robotten, hvordan det skal gøres. Cellen er enkel, nem at flytte rundt på og har en kompakt størrelse på 2,2 m x 1,2 m.
Hvis du har forskellige svejsebehov i løbet af ugen, skal du blot flytte EASY ARC til den ønskede placering i produktionen og vælge det ønskede gemte svejsemønster
MIG / MAG PAKKEN
- 3D-svejsebord med intelligente systemgittere til fastspænding og positionering af emner
- Færdigsamlet og med CE-mærket dokumentation
- Welbee P400 svejsemaskine (gasafkølet inverter pulsstrømkilde)
- OTC-sikkerhedsteknologi med overvågningsenhed (RMU) og kabinet
- Seks-akset robot, FD-B6, med integreret kabelføring for optimal tilgængelighed
- OTC robotsvejsebrænder med forced shutdown
Tilvalg 1 | Tilvalg 2 |
Welbee P500L svejsemaskine (vandafkølet inverter pulsstrømkilde) | Vandret rotationspositioner, A2-1PB250, inklusive Synchromotion-software og integration i Easy Teach-styringssystemet |
TIG PAKKEN
- 3D svejsebord med intelligente systemgittere til fastspænding og positionering af emner
- Færdigsamlet og med CE-mærket dokumentation
- Welbee P400 svejsemaskine (vandafkølet inverter pulsstrømkilde)
- OTC-sikkerhedsteknologi med overvågningsenhed (RMU) og kabinet
- Seks-akset robot, FD-B6 for maksimal fleksibilitet
- OTC robotsvejsebrænder med 3D forced shutdown
Tilvalg 1 | Tilvalg 2 2 |
Push-pull-system til indføring af svejsetråd i svejsebassinet | Vandret rotationspositioner, A2-1PB250, inklusive Synchromotion-software og integration i Easy Teach-styringssystemet |
CUBE SVEJSELØSNING
Løsningen til masseproduktion helt op til standard
CUBE Solutions
CUBEs er den største løsning blandt standardssystemerne og fås i fem forskellige varianter. CUBE Solutions muliggør meget effektiv svejseproduktion og hurtige cyklus-tider. Robotstationerne er designet til at være enormt pladsbesparende og leveres klar til brug."
Vælg din CUBE Solution
CUBE Solutions er meget tilpasningsdygtig. Med offline-programmering og digital tvilling som muligheder for løsningen kan du teste og arbejde på dine svejseapplikationer, før de implementeres i dit arbejdsmiljø.
Hvem for gavn af CUBE Solutions?
CUBE Solutions er designet til masseproduktion af både små og store dele, selvom du har brug for flere robotter. Den fleksible konfiguration muliggør multi-robot-applikationer.
CUBE er især en fordel for svejsning af produkter, der kræver flere applikationer. Du kan bruge CUBEs i multi-stationssystemer. Designet er optimeret til produktionshastighed, og den åbne PLC-konfiguration gør det muligt at bruge løsningen præcis, som du har brug for. Med et footprint på 2,2 m x 4 m passer det ind i mange svejselinjer eller arbejdsstationer.
Find det CUBE Svejsesystem du skal bruge
Welding Robot | 6-axes-arc-robot, type: FD19-V8 |
Payload | 8 kg |
Positional repeatability | ± 0,08 mm |
Max. working range (P-Point)t | Ø 2804 mm |
Weight | 140 kg |
Robot Controller | Type: FD-19 |
Max. no of task programs | 9999 programs |
Max. no. of axes | 54 axes |
General purpose Physical I/O | 40 input / output |
Weight | 62 kg (without transformer) |
Digital CAN-BUS communication with the OTC welding technology
Welding Technology | Type: Welbee WB-P402 |
Welding current range | 30 - 400 A |
Output voltage range | 12 - 34 A |
Duty Cycle | 280A / 100% |
Weight | 62 kg |
Digital Inverter technology with a significant improvement of arc stabilty over the entire performance range
Robot Welding Torch | RTW5000H (Fe/SuS) |
Torch position | 45° |
Max. welding current | 500 A / water-cooled |
Shock sensor | type SSV |
Positioning Technology | |
Type | fixed working |
Payload | 200 kg |
Working Height | 700 mm |
Work surface (LxW) | 1000x800 mm |
Welding Robot | 6-axes-arc-robot, type: FD19-V8 |
Payload | 8 kg |
Positional repeatability | ± 0,08 mm |
Max. working range (P-Point)t | Ø 2804 mm |
Weight | 140 kg |
Robot Controller | Type: FD-19 |
Max. no of task programs | 9999 programs |
Max. no. of axes | 54 axes |
General purpose Physical I/O | 40 input / output |
Weight | 62 kg (without transformer) |
Digital CAN-BUS communication with the OTC welding technology
Welding Technology | Type: Welbee WB-P402 |
Welding current range | 30 - 400 A |
Output voltage range | 12 - 34 A |
Duty Cycle | 280A / 100% |
Weight | 62 kg |
Digital Inverter technology with a significant improvement of arc stabilty over the entire performance range
Robot Welding Torch | RTW5000H (Fe/SuS) |
Torch position | 45° |
Max. welding current | 500 A / water-cooled |
Shock sensor | type SSV |
Positioning Technology | |
Type | RST-250 |
Payload | 2 x 125 kg |
180° pivot drive | Frequency controlled |
180° slewing time | 7 s |
Working height | 700 mm |
Work surface (LxW) | 1000x500 mm |
Welding Robot | 6-axes-arc-robot, type: FD19-V8 |
Payload | 8 kg |
Positional repeatability | ± 0,08 mm |
Max. working range (P-Point)t | Ø 2804 mm |
Weight | 140 kg |
Robot Controller | Type: FD-19 |
Max. no of task programs | 9999 programs |
Max. no. of axes | 54 axes |
General purpose Physical I/O | 40 input / output |
Weight | 62 kg (without transformer) |
*Digital CAN-BUS communication with the OTC welding technology
OTC robot software - Synchromotion |
Synchromotion control is a control process in which muliple mechanisms (manipulator,
auxiliary axes, ect.) operate simultaneously and the position, posture and speed of the
tools is controlled relative to the work. It is also sometimes referred to as cooperative
control. F.e. in an arc welding system the manipulator could maintain at all times the
optimal torch posture and speed, relative to the work mounted on the positioner
|
Welding Technology | Type: Welbee WB-P402 |
Welding current range | 30 - 400 A |
Output voltage range | 12 - 34 A |
Duty Cycle | 280A / 100% |
Weight | 62 kg |
Digital Inverter technology with a significant improvement of arc stabilty over the entire performance range
Robot Welding Torch | Type: RTW5000H (Fe/SuS) |
Torch position | 45° |
Max. welding current | 500 A / water-cooled |
Shock sensor | type SSV |
OTC 1-axis-headstock | |
Type | A2PB252-E |
Payload (tilt axis) | 250 kg |
Drive | AC Servo motor |
Vmax. Rotary axis | 150° /s |
Weight | 100 kg |
Welding Robot | 6-axes-arc-robot, type: FD19-V8 |
Payload | 8 kg |
Positional repeatability | ± 0,08 mm |
Max. working range (P-Point)t | Ø 2804 mm |
Weight | 140 kg |
Robot Controller | Type: FD-19 |
Max. no of task programs | 9999 programs |
Max. no. of axes | 54 axes |
General purpose Physical I/O | 40 input / output |
Weight | 62 kg (without transformer) |
*Digital CAN-BUS communication with the OTC welding technology
OTC robot software - Synchromotion |
Synchromotion control is a control process in which muliple mechanisms (manipulator,
auxiliary axes, ect.) operate simultaneously and the position, posture and speed of the
tools is controlled relative to the work. It is also sometimes referred to as cooperative
control. F.e. in an arc welding system the manipulator could maintain at all times the
optimal torch posture and speed, relative to the work mounted on the positioner
|
Welding Technology | Type: Welbee WB-P402 |
Welding current range | 30 - 400 A |
Output voltage range | 12 - 34 A |
Duty Cycle | 280A / 100% |
Weight | 62 kg |
Digital Inverter technology with a significant improvement of arc stabilty over the entire performance range
Robot Welding Torch | Type: RTW5000H (Fe/SuS) |
Torch position | 45° |
Max. welding current | 500 A / water-cooled |
Shock sensor | type SSV |
OTC 2-axis-H-positioner | |
Type | HP-1500 |
Payload (tilt axis) | 2x200 kg |
180° rotary unit | Frequency controlled |
Drive | AC Servo motor |
Distance between centers | 1500 mm |
Weight | 900 kg |
Welding Robot | 6-axes-arc-robot, type: FD19-V8 |
Payload | 8 kg |
Positional repeatability | ± 0,08 mm |
Max. working range (P-Point)t | Ø 2804 mm |
Weight | 140 kg |
Robot Controller | Type: FD-19 |
Max. no of task programs | 9999 programs |
Max. no. of axes | 54 axes |
General purpose Physical I/O | 40 input / output |
Weight | 62 kg (without transformer) |
Digital CAN-BUS communication with the OTC welding technology
OTC robot software - Synchromotion |
Synchromotion control is a control process in which muliple mechanisms (manipulator, auxiliary axes, ect.) operate simultaneously and the position, posture and speed of the tools is controlled relative to the work. It is also sometimes referred to as cooperative control. F.e. in an arc welding system the manipulator could maintain at all times the optimal torch posture and speed, relative to the work mounted on the positioner |
Welding Technology | Type: Welbee WB-P402 |
Welding current range | 30 - 400 A |
Output voltage range | 12 - 34 A |
Duty Cycle | 280A / 100% |
Weight | 62 kg |
Digital Inverter technology with a significant improvement of arc stabilty over the entire performance range
Robot Welding Torch | Type: RTW5000H (Fe/SuS) |
Torch position | 45° |
Max. welding current | 500 A / water-cooled |
Shock sensor | type SSV |
OTC 2-axis-double-support | |
Type | A2PF301-ECN |
Payload (tilt axis) | 300 kg |
Drive | AC Servo motor |
Vmax. rotary axis | 180° /s |
Vmax- tilt axis | 125° /s |
Weight | 260 kg |