Image modeSupports 1-line and 2-TDI
40.5 kHz (Base), 81 kHz (Medium), 162 kHz (Full), 195 kHz (80-bit)
Configuration modeBase, Medium, Full, 80-bit
Tap geometry1 × 2, 1 × 4, 1 × 8, 1 × 10
Tap number2 Taps, 4 Taps, 8 Taps, 10 Taps
Pixel clock40 MHz, 66 MHz, 80 MHz, 85 MHz
Supports 1.0 ×, 1.4 ×, 1.6 ×, 2.4 ×, 3.2 ×
Exposure time3 μs to 10 ms
Off/ Once/ Continuous exposure mode; supports fixed time exposure, trigger-width exposure
Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4
Reverse imageSupports horizontal reverse image output
Trigger modeExternal trigger, internal trigger
External trigger modeLine trigger, frame trigger, line + frame trigger
Camera Link (SDR connector); USB interface for updating firmware
12-pin P10 connector provides power and I/O: configurable input/output × 4 (Line 0/1/3/4) and support single-ended/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4).
Power supply12 VDC to 24 VDC
Power consumptionTyp. 8 W @ 12 VDC
M42*1.0, flange back length 12 mm, applicable to F-mount, C-mount and lens of other types via lens adapter
62 mm × 62 mm × 36.9 mm (2.4" × 2.4" × 1.5")
WeightApprox. 238 g (0.5 lb.)
Ingress protectionIP40 (under proper lens installation and wiring)
Working temperature: –20 °C to 45 °C (–4 °F to 113 °F)
Storage temperature : –30 °C to 80 °C (–22 °F to 176 °F)
Humidity5% RH to 95% RH (no condensation)
Client softwareMVS and frame grabber software meeting with Camera Link Protocol
Operating system32/64-bit Windows 7/10, 64-bit Windows 11
CompatibilityCamera Link V2.1, GenICam
CertificationCE, RoHS, KC
