sensopart

Robotics


Calibration Plates and Target Marks


Do you need calibration plates or target marks for your VISOR® vision sensors? Let's help you find the kind you need for your application, or take a look at different models below. 

(Accessories not readily available in the ZTEC Shop yet. Contact us for your mounting needs.)





Contact us



Robotics Models


Illustration Description Category
ZCP 100-13x15 Calibration plate, 15x13 points, 100 mm x 75.8 mm Calibration plates
ZCP 100-13x15-X01 Calibration plate, 15x13 points, crosshairs, 100 mm x 75.8 mm Calibration plates
ZCP 100-13x15-X02 Calibration plate, 15x13 points, fiducials, 100 mm x 75.8 mm Calibration plates
ZCP 100-ECC200 Calibration plate for Code Reader ECC200 quality parameters, 100 mm Calibration plates
ZCP 200-13x15 Calibration plate, 15x13 points, 200 mm x 151.7 mm Calibration plates
ZCP 200-13x15-X01 Calibration plate, 15x13 points, crosshairs, 200 mm x 151.7 mm Calibration plates
ZCP 50-13x15 Calibration plate, 15x13 points, 50 mm x 37.9 mm Calibration plates
ZCP 50-13x15-X01 Calibration plate, 15x13 points, crosshairs, 50 mm x 37.9 mm Calibration plates
ZCP 500-13x15 Calibration plate, 15x13 points, 500 mm x 379.2 mm Calibration plates
ZCP 500-13x15-X01 Calibration plate, 15x13 points, crosshairs, 500 mm x 379.2 mm Calibration plates
ZTM 100-D2-4x3.3 Target Mark, 100 mm, auto-ID, mounting holes, adhesive pads, Target marks
ZTM 100-D2-4x3.3-12 Target Mark, 100 mm, auto-ID, mounting holes, adhesive pads, set of 12 pcs. Target marks
ZTM 100-D2-RF-4x3.3 Target mark for VISOR® vision sensors Target marks
ZTM 38-D2-RF-2x3.3 Target mark for VISOR® vision sensors Target marks
ZTM 50-D2-2x3.3 Target Mark, 50 mm, auto-ID, mounting holes, adhesive pads Target marks
ZTM 50-D2-2x3.3-12 Target Mark, 50 mm, auto-ID, mounting holes, adhesive pads, set of 12 pcs. Target marks


Invite us to your location!

Let's talk about your sensor needs!


Book a robot visit 



Ready to ask a question?

We answer within 24 hours on week days!

Ask a question